HOW TO PAIR TWO JBL CLIP 2 SPEAKERS TOGETHER-“Ultimate GUIDe”

PAIR TWO JBL CLIP 2 SPEAKERS TOGETHER

Starting the process of pairing two JBL Clip 2 speakers leads to an amazing audio experiences.

Known for being portable Bluetooth speakers and famous in the audio devices market for being waterproof, they do more than just play sound; they set the mood.

JBL models, the Clip 2 stands out for its easy connections with identical models.

Here’s a quick guide to pair two JBL clip 2 speakers together:

1- Turn on both speakers.

2- Then, press the Bluetooth button on one until it enters pairing mode, indicated by a flashing light.

3-Repeat this step with the second speaker.

4- They should automatically connect. If not, just repeat the steps. This way, you’ll double the audio output, enhancing your listening experience significantly.

The process, though it might seem complex, is actually quite straightforward with the right instructions.

Here, I’ll share my personal experience and expertise in detail for connecting these speakers So that you can enjoy enhanced audio output effortlessly.

KEY TAKEAWAYS


  • Ensure speakers are adequately charged before starting the pairing process.
  • Connect the primary speaker to a source device (like an iPhone, iPad, laptop).
  • Power on the primary speaker; it automatically enters pairing mode.
  • If previously connected to a device in range, it will reconnect automatically.
  • For manual pairing, press the Bluetooth button; the LED will start blinking blue.
  • After pairing the primary speaker, power on the secondary speaker. Ensure it’s not connected to another device. If it is, press the Bluetooth button for pairing mode.
  • Press and hold the Bluetooth button on both speakers for five seconds.
  • Listen for a tune from each speaker, signaling they’re ready to pair.
  • Finally, the speakers will play a tune to confirm they have been successfully paired.

PAIRING TWO JBL CLIP 2 SPEAKERS TOGETHER

Lets see how to pair two JBL speakers together

STEPS-HOW TO PAIR TWO JBL CLIP 2 SPEAKERS TOGETHER

Lets discuss all these steps in detail to get  clear understanding of how to pair JBL CLIP 2 speakers together

1. POWER ON THE PRIMARY SPEAKER

To start, power on your primary speaker. Simply press the power button located at the top of the clip.

Watch for the LED to light up, accompanied by a guitar strum sound.

2. CONNECT TO YOUR SOURCE DEVICE

Now connect your speaker to a source device. Ensure Bluetooth connectivity is on, then search for JBL Clip 2.

It should automatically pair if it was previously connected. Otherwise, manually enable pairing mode by pressing the Bluetooth button.

3. POWER ON THE SECONDARY SPEAKER

Then, power on your secondary speaker.

If your primary speaker is already powered and connected to a source device, the secondary one turns on and enters pairing mode to connect.

4. PRESS AND HOLD THE BLUETOOTH BUTTON

Press and hold the Bluetooth button on the primary speaker for five to six seconds.

You’ll hear a distinct tone, and the LED will start flashing blue, indicating it’s ready to connect. Do the same with the Clip 2 speaker.

DISCONNECTING THE CONNECTED SPEAKERS

To disconnect the linked Clip 2 speakers, simply press the Bluetooth button. You can switch off to disconnect or power off the speakers.

To reconnect, repeat the process after you power on again.

HOW MANY CLIP 2 SPEAKERS CAN I PAIR TOGETHER?

Regarding Clip 2 speakers, you can only connect two at a time due to their connection protocols.

Unlike Connect+ or PartyBoost models, these don’t support connections to more than two speakers

WHY WON’T MY CLIP 2 SPEAKERS PAIR TOGETHER?

Sometimes, various unrelated reasons can prevent your Clip 2 speakers from connecting. 

  • Signal interference from other Bluetooth devices can be a common issue.
  • Try to disable other connectivity and move to an area with less interference.
  • Low battery levels in the speakers can affect the pairing process.
  • Ensure both speakers are adequately charged; a blinking red LED indicates a need for charging.
  • If speakers are interrupted or far apart, bring them closer together.
  • Ensure the secondary speaker is not connected to any other source device.
  • If pairing issues persist, disconnect and retry the pairing process.

Note: After playing audio on the primary speaker, it may take around twenty seconds to pair with the second one.

HOW TO CONNECT JBL CLIP 2 TO MOBILE DEVICES

CONNECT TO AN ANDROID PHONE

To connect your JBL Clip 2 to an Android Phone:

  • Open Settings on your Android Phone and go to Connections.
  • Activate the Bluetooth function by changing the gray button to blue.
  • Wait for the phone to start scanning for available devices.
  • Look for JBL Clip 2 in the device list.
  • Click on JBL Clip 2 to pair with your phone.
  • Listen for a confirmation tone from the speaker to ensure successful pairing.
  • Always verify the connection after pairing.

How to pair JBL Clip 2 to Samsung Android phone

PAIR TO AN IPHONE

For iPhone users:

  • Navigate to Settings and select Bluetooth on your iPhone.
  • The iPhone will scan for nearby devices.
  • Click on JBL Clip 2 when it appears to initiate pairing.
  • Listen for a three-beep sound indicating a successful connection.

HOW TO CONNECT TO LAPTOPS

WINDOWS 10 LAPTOP

On a Windows 10 Laptops:

  • Press Windows + I to open Windows Settings.
  • Select Devices, then choose Bluetooth.
  • Click Add an other device and wait for the scan to detect Bluetooth-ready devices.
  • Click on JBL Clip 2 when it appears, and listen for a confirmation sound.

MACBOOK

For MacBook users:

  • Open System Preferences and select Bluetooth.
  • Turn on Bluetooth to make the MacBook discoverable.
  • The MacBook will scan for Bluetooth-ready devices.
  • Select JBL Clip 2 from the options when it appears. A sound confirms successful pairing.

CONNECT THE JBL CLIP 2 TO A SECOND DEVICE

Yes, you can pair your JBL Clip 2 with a second device.

First, turn off the Bluetooth on the first device.

Your speaker will immediately revert to pairing mode.

To pair with another device, go to its Bluetooth settings and manually select the JBL Clip 2.

The Bluetooth button on the speakers, located at the bottom right-hand side, will have a light flash blue when it’s ready to pair and discoverable.

RESET JBL CLIP 2 SPEAKER

To reset your JBL Clip 2 speaker,:

Power on and simultaneously press the Call and Volume Up buttons.

Hold them for three to five seconds.

The buttons are located on the side, between the Volume Down and LED on the top back of the speaker.

After resetting, the speaker will automatically enter pairing mode.

RELATED : RESET JBL SPEAKERS

FREQUENTLY ASKED QUESTIONS

Question: Can you pair two JBL Clip 2 together?

To pair two JBL Clip 2 speakers together, power the first speaker and connect it to a source device.

Then, put the second speaker in pairing mode by pressing and holding the Bluetooth button on the primary speaker for five seconds.

The secondary speaker will play a tone and its LED will start flashing blue, indicating it’s ready to connect.

Question: Does JBL Clip 2 have Connect Plus?

JBL Clip 2 does not have the Connect Plus feature, which allows to daisy link hundred speakers.

You can only link two JBL Clip 2 speakers.

Question: Can you connect JBL Clip 2 and Clip 3?

It is not possible to connect a JBL Clip 2 and a Clip 3 speaker together;

You can only pair two identical models.

TO WRAP IT UP

Linking two Clip 2 speakers together is surprisingly easy. First, ensure they are fully charged and close to each other. This proximity is key to ensure the pairing process is not interrupted.

If you encounter any challenges, don’t hesitate to contact JBL customer support for assistance.

Additionally, access the speaker manual on JBL’s website to learn more about every feature your Clip 2 speakers offer. With these steps, you’ll enjoy seamless audio in no time.

How to daisy-chain two JBL Clip2 Bluetooth speakers

Leave a Comment