JBL Flip 6 Not Charging

JBL Flip 6 Not Charging


Key Takeaways

  • Inspect the Battery: If your JBL Flip 4 isn’t charging, a defective battery could be the culprit, especially if it’s been exposed to extreme temperatures. Consider replacing the battery to resolve the issue.
  • Clean the Charging Port: Dirt, dust, and debris often accumulate in the charging port, obstructing the connection. Gently clean it with a micro-fiber cloth and use a toothpick or pin to carefully remove any sediment buildup before connecting the micro USB charger.
  • Examine the Micro USB Cable: A bent or physically damaged micro USB cable can prevent your JBL Flip 4 from charging. Check for any visible signs of wear or damage, and replace the cord if necessary.
  • Check for Circuit Board Damage: Extreme heat can harm the internal circuit board of your speaker, leading to charging issues. If you suspect this is the problem, take your JBL Flip 4 to a service center for a professional assessment and repairs by a qualified technician.



Reasons Why JBL Flip 6 Might Not Charge

Navigating the challenges of a non-charging JBL Flip 4 speaker doesn’t have to be overwhelming, even if you’re not particularly tech-savvy.

I’m here to guide you with some effective strategies to revive your JBL Flip 4 wireless speaker and restore its charging capabilities seamlessly

How to Tell That if JBL Flip 6 is Not Charging

When my JBL Flip 6 speaker’s battery status gauge stopped getting progress, indicating a charging issue, I noticed it wasn’t connecting properly to the power outlet.


The usual pulsing red alert for a low battery was absent, and instead of a flashing white, the meter on top remained dark, signaling no recharging was happening.

I checked the charger and power adapter, ensuring they were connected and the power supply was present and active.

Despite several hours of connecting and recharging attempts, the speaker remained dark and unresponsive. I realized the problem could be a low battery that stopped charging due to a faulty adapter or an issue with the internal power mechanics.

How to Fix if JBL Flip 6 is Not Charging

To fix this charging issue:

I considered all possible fixes, including troubleshooting the battery, ensuring the charging case and cables were damage-free, and seeking professional help if the speaker showed signs of overheating or not charging at all.

Lets begin !

Check The Power Outlet

The first step in diagnosing your JBL Flip 6 not charging is to ensure the power outlet has power. Check if the battery status gauge on the speaker shows any signs of power.

If the meter at the top remains dark or the progress lights are not pulsing red, it could indicate a low battery. Try connecting the speaker to a different power outlet.

If it starts charging, the previous outlet may be in lousy condition or experiencing a power outage.

Be cautious of any burnt plastic smell or sparks when the charger is plugged in, as these could be life-threatening and lead to fires.

Check The Adapter & USB Cable

Next, check the charging adapter and USB cable. A faulty or damaged adapter can prevent your speaker from charging. Look for any cuts, weird bends, or naked wires on the USB cable.

A low quality or worn out cable often refuses to charge, even if the power outlet and speaker are in perfect condition. If the battery is not charging, try using a different cable and adapter.

Ensure they are correctly connected and the adapter is not warm or heats up excessively. If the charging stops, it might indicate an issue with the power supply itself, rather than the speaker.

Always remember to fix these problems safely and be mindful of any possible fixes to avoid further damage to your device.

Dirty Or Wet Inside Charging Port

Additionally, dirt or water in the charging port can interfere with the connection.

The JBL Flip 6 has a unique USB-C charging protection feature, which alerts you with a tone if a wet USB cable or one coated in dust or chemicals is connected.

If the speaker is not charging, check for dirt pile up or foreign substances in the port. Using a soft bristle brush or compressed air can can help clean these areas safely.

Connect the speaker to the power outlet only when the ports are dry and clean.

  • Remember, even though the Flip 6 is waterproof, its charging port is not, and care should be taken to fix this problem.

These possible fixes can save you several hours of frustration and noticeable improvement in charging performance.

Use Compatible Adapter

To address the common problem of the JBL Flip 6 not charging, ensure that you’re using a charging adapter that matches the speaker’s power requirements.

The ideal power requirement is 5 Volts and 3 Amperes. A lower-rated charger will charge slowly or not at all, leading you to believe the speaker is not working.

This is especially true if the battery status gauge remains dark, the progress lights don’t show a pulsing red, or the power supply stops providing energy.

  • If you’re using a charger with a flashing or blinking white indicator, it might not be compatible.

When connecting, make sure that the charger is correctly fitted and the adapter is not warm or heats up excessively, as this can be a sign of an issue.

Leave The Speaker Connected To The Charger

When your JBL speaker faces charging issues, a drained battery could be the culprit, especially if it’s been stored without recharging for an extended period.

A dead battery is a common problem in such cases. Keep the speaker connected to the charger and plugged into a power outlet for at least two to three hours.

Sometimes, if you’re lucky, this simple step gets it back to charging.

Fully charging a drained battery can revive a speaker. Especially if you’re planning to store it for a while, regular charging is essential to avoid hardware problems.

  • JBL recommends fully charging the speaker at least once every three months. So, never store it with a drained battery.

However, if this does not work, you might be having a problem with the speaker’s hardware.

Restore To Factory Settings

If the charging issue persists, consider a factory reset.

This can resolve problems caused by a software bug. Systems not working or controlling the charging process correctly could be reset to normal with this step.

  • This can resolve problems caused by a software bug. Systems not working or controlling the charging process correctly could be reset to normal with this step.

Here is how you can reset:

  • Begin by forgetting the speaker from any devices it’s been connected to via Bluetooth settings.
  • Power On: Press the power button on the speaker. Wait for the strum sound and the solid white power LED, signaling it’s on.
  • Initiate Reset: Simultaneously press and hold the Play/pause and Volume Up buttons for six seconds.
  • Confirm Reset: Listen for a tone and observe the speaker powering off, indicating a successful factory reset.
  • Recheck Charging: After the reset, turn the speaker back on using the power button and test if the charging issue is resolved.

Watch Tutorial :How To Reset a JBL FLIP6 – Quick and Easy!

Essential Firmware Updates

Another crucial aspect to look into is firmware.

An outdated firmware can cause your speaker to malfunction, including charging problems.

Updates often come with new features and fixes for known issues.

Use the JBL portable app on your smartphone, available on Google Play or the App Store, and connect your Flip 6 via Bluetooth. The app should detect if any updates are available and prompt you through the setup process. Complete this process to ensure your speaker functions optimally.

In addressing charging issues with the JBL Flip 6, combining these strategies often yields results.

From ensuring the battery is not overly drained, to updating software and resetting to factory settings, each step plays a role in troubleshooting.

The app may need the speaker connected to power for updates, which is tricky if it’s not charging. If you see prompt, “connect the charger and try updating”. If that fails, move on to other troubleshooting steps.

Maintain Temperature of The Speaker

For your JBL Flip 6, ensuring it’s stored in a cool and dry place is vital for maintaining its charging ability.

This speaker is designed to withstand a range of temperatures, but both extremely hot and cold environments can affect its charging process.

  • According to the specification sheet, the optimal operating temperature is below forty-five degrees Celsius.

So, always store your speaker in an area where temperatures are stable and not exposed to extreme cold or heat to ensure efficient charging.

Dead Battery

Over time, JBL speakers with Lithium-ion batteries may die after several years or charge cycles.

If your JBL Flip 6 is over two years old and facing charging issues, the battery might be worn out. In such cases, a replacement from a JBL-authorized dealer is recommended.

  • Avoid counterfeit or substandard batteries as they can void your warranty and may not meet the battery replacement cost standards of a JBL store.

If your warranty has expired, replacing the battery through a third-party technician can be costly and risky, especially if they’re unfamiliar with the speaker’s waterproof seal.

Multiple reasons might be hindering the charging process of your Flip 6. These includes the following:

  • Ensure proper power from the outlet.
  • Use of incorrect adapter and USB cable.
  • Extreme hot or cold conditions
  • Look for a system malfunction.
  • Charging port might be dirty or wet
  • Dead battery may stop it from charging

To fix a JBL Flip 6 speaker that is not charging, start with basic troubleshooting

  • Ensure proper power from the outlet.
  • Use the correct adapter and USB cable.
  • Avoid extreme hot or cold conditions
  • Look for a system malfunction or outdated firmware
  • Clean the wet or dirty charging port.
  • Replace if the battery is worn out

If these steps don’t work, a factory reset might be necessary to resolve any underlying software issues.

If your JBL Flip 6 beeps when you plug it in, it’s leveraging its USB-C charging protection feature. This feature is designed to notify you whenever it detects dirt, chemicals, or water in the charging port.

This beep is a safety measure, aimed at prolonging the speaker life and maintaining its waterproof capabilities.

The charge time for a JBL Flip 6 to be fully charged is typically around two and a half hours, provided you’re using a 5V/3A charger.

Once fully charged, the battery can last up to twelve hours, depending on usage patterns. This efficient charging time ensures your speaker is ready to go when you are, making it a reliable companion for your musical adventures.

One common issue is the batteries. Over years of use, these batteries can become a letdown, especially when they stop charging. It’s a reminder that even the best devices need replacement parts and delicate care.

If you encounter issues or have queries, don’t hesitate to contact their customer support.

JBL Flip 6 Not Charging and Turning On? Try These Quick Fixes!

Leave a Comment